Strobe light - beacon These 12-16J strobes are built with the toughest environments in mind; from the rugged die-cast aluminium base to the conformal coated circuit board. No tools are needed to change the flash tube or remove the threaded o-ring sealed lens.
4261 Model: Double 80FPM 12J 12-24V
4262 Model: Double ⁄ Quad 80FPM 12⁄16J 12-48V
Dimensions: B: 6.4" H: 6.2" [161x156mm]
Lens: Twist On⁄Off
Base: Al D⁄CastCircuit: Conformal Coated
Strobe light - beacon
Strobe: medium profile, 12-48 VDC, 7 or 10 joules, double or quad flash
Medium Profile Strobe
Amber, Blue, Clear & Red
Flush mounted without removing lens
Field replaceable flash tube (no tools required)
Integral flange, internal and 1" pipe mounting
Designed for mounting in areas where a compact profile is required
Seven support points provide a shock-resistant mounting of the power supply
Three wire leads allow user to choose double flash or quad flash
UV stabilized polycarbonate thread-on lens allows user to change the flash tube without tools
Voltage spike and surge protected
Medium Profile Strobe
Amber, Blue, Clear & Red
Flush mounted without removing lens
Field replaceable flash tube (no tools required)
Integral flange, internal and 1" pipe mounting
Designed for mounting in areas where a compact profile is required
Seven support points provide a shock-resistant mounting of the power supply
Three wire leads allow user to choose double flash or quad flash
UV stabilized polycarbonate thread-on lens allows user to change the flash tube without tools
Voltage spike and surge protected
Strobe light - beacon12 - 110 volt DC
1.5J economy strobe features a linear flash tube with a twist on lens with sealed o-ring for easy flash tube replacement; A rugged ABS base for vibration resistance and a fully encapsulated circuit board. Dimensions: B 5.1" H 3.8" [129x95mm]Lens: Twist On⁄OffBase: ABSCircuit Board: EncapsulatedVoltage: 12-110V
Tidak ada komentar:
Posting Komentar